The metal plates on the roof of the steel structure factory building should be treated with corresponding anti-corrosion measures during transportation and construction. If rusted parts are found, rust removal treatment should be carried out. After cleaning up the rust residue, anti rust paint should be applied within 24 hours to prevent secondary corrosion. If this trend continues, we believe that there is still a lot of market space waiting to be explored for steel structures, and we will continue to improve and optimize according to the needs of consumers. 4) The rust removal and removal of the corroded oxide layer and slag covering the surface of the original old steel structure must be thoroughly carried out by connecting a dedicated sandblasting rust removal machine with an air compressor. Some severely corroded parts require manual steel chiseling and hammering ..

When the surface treatment of the steel structure is qualified and sufficient, the spraying of anti-corrosion primer is required for the construction of anti-corrosion paint on the steel structure

After reading the previous content, everyone should have a new understanding of laser cutting robots. Cutting robots are a product of the high-tech era. While reducing production costs for enterprises, improving product quality is a symbol of industrial intelligent production. The widespread application of robots brings obvious development advantages to enterprises. Common problems and solutions of laser cutting robots: Analysis of deformation of small holes (small diameter and plate thickness) during cutting and processing: This situation is mainly due to the fact that the machine tool does not use explosive perforation during processing, but uses pulse perforation (soft puncture), which makes the laser energy very small ..

Besides using laser cutting to cut traditional metals such as steel, do you also know that laser cutting can be used for reflective metals? In addition, you can use laser cutting technology to create complex and intricate shapes. If the side of the film is lowered, due to thermal effects, the residue splashed out from the cutting process of the fiber laser cutting machine will adhere to the film, which will cause the coating side to be very rough and it will be very difficult to handle the residue. Therefore, it is recommended that customers cut the coating surface first. Therefore, when using a laser cutting machine to paint stainless steel, the surface coating should be wiped off first.