Characteristics of laser cutting
2021-11-11The laser beam is focused into very small light spots, achieving a high power density at the focal point. At this point, the heat input by the beam far exceeds the part reflected, conducted, or diffused by the material, and the material quickly heats up to the point of vaporization, forming pores through evaporation.
-
Classification of laser cutting
2021-11-09The price of laser cutting equipment is quite expensive, about 1.5 million yuan or more. With the continuous development of the storage tank industry, more and more industries and enterprises are using storage tanks, and more and more companies are entering the storage tank industry. However, due to the reduced cost of subsequent processing, it is still feasible to use this equipment in large-scale production. -
Technical measures for steel structure reinforcement
2021-11-06When steel structures are also damaged, we need to immediately detect and solve the problem. Steel Structure Network introduces that the main factors causing steel structure damage are: -
Basic characteristics of steel structures
2021-11-03Steel structures have high strength and elastic modulus. Compared with concrete and wood, the ratio of density to yield strength is relatively low. Therefore, under the same stress conditions, steel structures have smaller cross-sections, lighter self weight, are easy to transport and install, and are suitable for structures with large spans, high heights, and heavy loads. -
Vigorously promote steel structure residential buildings
2021-10-29Experts such as Liu Yi, Vice President of China Metallurgical Construction Research Institute and Executive Vice President of China Steel Structure Association, unanimously believe that the technology of steel structure residential buildings in our country is becoming increasingly mature, and large-scale promotion is imperative. -
Analyzing the safety operation technical requirements of the shearing machine in the steel plate processing process
2021-10-27The shearing machine is a widely used cutting equipment in the process of steel plate processing, which can cut steel plate materials of various thicknesses. The commonly used shearing machines are divided into three types: flat shearing, rolling shearing, and vibration shearing.
关闭返回